Operator’s Manual Power Washer Model PW3600 WARNING: Do not assemble, install or operate this equipment without reading ALL of this manual and the saf
KDAR Company 9 Item What To Do Each Use First Month or 20 Hours Every 3 Months or 50 Hours Every 6 Months or 100 Hours Every Year or 300 Hours Engi
KDAR Company 10 Fuel Valve Cleaning 1. Remove the sediment cup and O-ring at the bottom of the fuel valve with a small wrench. 2. Clean and wash ou
KDAR Company 11 Maintenance Maintenance Schedule—Pump 1. Check all connections on the pump, hose, gun and wand before each use. 2. Clean connection
KDAR Company 12 Transporting/Storage 3. Depress the trigger on the gun to relieve the pressure and drain water from the high pres-sure hose. 4. Dis
KDAR Company 13 Troubleshooting Engine Will Not Start Is there fuel in the tank? Refill the tank. Is there oil in the engine? Add the recommended o
KDAR Company 14 Troubleshooting No Pressure from Gun/Wand Is faucet open? Open faucet Inadequate water supply? (4gpm @ 20 psi) Improve water supply
KDAR Company 15 Limited Warranty KDAR Company, and its affiliates, warrants that the power washers covered under this warranty are free from defects
SAFETY PRECAUTIONS AND WARNINGS PLEASE READ BEFORE USING EQUIPMENT DANGER DANGER indicates a potentially hazardous situation which, if not avoided, W
SAFETY PRECAUTIONS AND WARNINGS PLEASE READ BEFORE USING EQUIPMENT 12. Stay alert. Watch what you are doing and use common sense when operating a powe
KDAR Company 3 Specifications/Features & Benefits/Package Contents Table 1 1. 3600 PSI Maximum Pressure 2. 3000 PSI Rated Pressure 3. 3.0 Gall
4 KDAR Company Set Up Air Filter Choke Fuel Valve Manual Recoil Starter Handle Nozzle Gun Extension Spray Wand Throttle Thermal Relief Valve Water Su
KDAR Company 5 Set Up Wheel, Handle & Holder Assembly Note: All fasteners can be tightened as each procedure is completed. There is no need to wa
KDAR Company 6 Fueling the Engine WARNING Gasoline is extremely flammable and is explosive under certain conditions. Fuel and refuel in a well
KDAR Company 7 Operation Starting the Engine 1. Check the oil and fuel levels. 2. Open the fuel shut off valve. Pre-Start Preparation NOTE: The fol
KDAR Company 8 Operation Nozzle Selection Note: The force of the spray on the surface be-ing cleaned increases as the nozzle is moved closer to the s
Comments to this Manuals